Gypsum Board Ceiling
GI channel framing and gypsum board fixing, with joints taped and finished seamlessly smooth.
From a simple flush ceiling to a stepped design with cove lighting.
GI channel framing and gypsum board fixing, with joints taped and finished seamlessly smooth.
Designer cornice and moulding work, including curved and stepped ceiling designs.
Ceiling cutouts planned in advance for LED strip or spotlight fittings, coordinated with your electrician.
Primer and emulsion finish on the completed ceiling, matched to your wall colours.
Lighting is planned before the boards go up, not after.
We measure the room, discuss ceiling height and lighting layout, and sketch out the design before ordering material.
A GI channel or wood frame is fixed to the slab, level and spaced correctly to carry the ceiling board.
Gypsum boards are screwed into the frame, or POP is applied and moulded, depending on the design chosen.
Cutouts for lights and wiring are planned and cut in coordination with your electrician, before the final finish.
Joints are taped and finished smooth, the ceiling is primed and painted, and the site is cleaned before handover.
Quick answers before you call.
A standard living room, gypsum board with basic cove lighting, usually takes 3 to 5 days including painting.
A simple flush design needs as little as 4 to 6 inches. A design with cove lighting or multiple levels needs more — we'll tell you the exact drop before you commit.
It's possible, but it means opening the ceiling up again. It's far cheaper to plan lighting cutouts before the boards go up.
Yes, and we'll recommend whichever suits your design, budget and timeline — they're not interchangeable in every situation.
Tell us the room size and the kind of lighting you want, and we'll work out a design and estimate.